WIFI ENET Dongle is our Wireless flashing solution for BMW's equipped with the ENET protocol.
Our WIFI ENET Dongle can be used on any ENET compatible app/program, this includes but not limited to:
Important Note:
If you are using a mobile device iOS or Android, and are having issues with the app connecting to the vehicle ensure your mobile or cellular data is disabled or enable the "hotspot" mode (hotspot mode is automatically installed on all devices from 06 OCT 2021 & was removed on 23 OCT 2022 due to continual software incompatibilities with new Android and iOS versions.
Access Point Mode aka "WIFI Mode": To connect to the device simply open the WIFI settings of your device (laptop, phone, tablet etc) and connect to the following WIFI network:
Only on firmware V6 and below The WIFI SSID (Name): Navardi Tuned The WIFI Password: **navardituned
Only on firmware V7 and above** The WIFI SSID (Name): Navardi Tuned ENET The WIFI Password: navardituned
By default the device is setup out of the box to be correctly configured to the IP range of the FEM_BODY module in the vehicle. It will auto negotiate with the connected devices (both the vehicle and the users device) and assign an IP address in the 169.254.250.xxx range (only on firmware V6 and below V7 uses 192.168.16.xxx) . Should DHCP not assign an IP address on your device please assign a static IP address somewhere within that range, example below.
Only on firmware V6 and below
IP address: 169.254.250.250
Subnet Mask: 255.255.0.0
Default Gateway: Blank or 169.254.250.249 (some users have better experience with either)
Only on firmware V7 and above IP address: 192.168.16.250
Subnet Mask: 255.255.255.0
Default Gateway: Blank or 192.168.16.1 (some users have better experience with either)
Note for mobile (cell) phone users: (Laptop/Computers of Mac, Windows and Linux are unaffected by this issue).